Table of Contents
Advertisement
34
Getting Started
Before You Begin
Before You Begin
10/100 Internal PS offers many features, but how you access and work with them is dependent
on your environment. Before you begin, you need to get information from the 10/100 Internal
PS configuration label.
Important •
Table 5
label with different DPI printheads.
To print a network configuration label for BBP81 (4") and BBP81 (6") printers
with a 10/100 Internal PS, complete these steps:
1.
2.
3.
4.
5.
Y885775
Make sure the printer is turned off (
shows the minimum label widths needed to print a 10/100 Internal PS configuration
DPI
300
Turn on (
I
) the printer and let it complete its power-up cycle.
When the POST cycle is complete, press
Scroll through the parameters using the
Press Select to access List Network. Print+ displays.
Press
+ key) to print the network configuration label.
Plus (
BradyConnect 10/100 Internal Print Server User Guide
O
).
Table 5 • Label Width
Inches
2.50
Setup/Exit
to enter the Setup Mode.
+ key) until you reach List Network.
Plus (
MM
63.50
07/18/2008
Advertisement
Table of Contents
Troubleshooting
