Table of Contents
Advertisement
6 Maintenance
The BradyPrinter A5500 printer requires periodic maintenance to ensure trouble-free operation. The
system uses the cycle count to determine when maintenance is required. A maintenance reminder
message is displayed when the cycle interval is reached.
Cleaning
Perform maintenance when prompted by the printer, unless otherwise specified in the instructions in
this chapter. Keep the printer running at optimal performance with routine cleaning and maintenance.
To find the cycle count go to Settings > Print Adjustments > Cycles. Follow these instructions to clean
the flagger surface, printhead, rollers, and sensors.
Before You Begin
Prior to performing any cleaning or maintenance on the BradyPrinter A5500 printer, you must perform
the following steps:
1. On the touch screen, tap Load Supplies and then tap Load Supply.
This shuttles the print mechanism back.
2. Power off and unplug the printer.
3. Open the side door on the printer.
4. Remove label supply, making sure to release the label roll to avoid damaging the smart cell.
For details see
5. Close the side door.
Note: Remember to reload label material before attempting to print/flag labels.
BradyPrinter A5500 User Manual
You must power off and unplug the BradyPrinter A5500 printer
WARNING!
prior to performing any cleaning or maintenance!
"Remove previously used material:" on page
19.
39
Advertisement
Table of Contents
