Table of Contents
Advertisement
Service Manual PAM 3600
Device List
The most important hardware components installed in the printer and the connected optional devices are listed in
the "Device list" submenu.
Please also refer to the "Test Functions" section of the Operator's Manual for the printout of the device list and
further information.
Proceed as follows to print the device list:
1.
Insert the service key into the Master USB socket.
2.
Switch from online mode to the offline menu by pressing the
3.
Press the
4.
Select the "Device list" function with the
Start the printout with the pre-dispense key.
The printout can be aborted with the
The printout contains the following information:
CPU
Type and serial number of the CPU PCB, revision number of the CPU PCB and FPGA
TPH
Resolution and number of hot points of the thermal printhead
CARD*
Capacity, manufacturer, serial number and version number of the FlashCard
SLOT*
Type, serial number and revision number of the interfaces expansion card
USB [a]* Type and revision number of the installed
[b/c] s
USB devices
a:
b:
c:
s:
Only with inserted service key:
Mfr.
Class
Protocol Code number for the type of communication with the USB device
Phase
(* This information is only printed if the corresponding devices are installed.)
Figure 2c Device List with Service Key inserted
Printer Applicator System PAM 3600
or
key until you reach the "Test" menu, and then press the
Number of the USB device
Number of the USB device to which device a is connected
Port number of device b, to which device a is connected
Speed of the USB device (Low Speed or Full Speed)
Manufacturer ID indicates the manufacturer of the USB device
Code number for the USB device class
Internal value for debugging purposes
key.
or
key and confirm with the
key.
2 Expanded Functions for Servicing
key.
key.
15
Advertisement
Table of Contents
