Appendix 3: Using the TLS2200
™
Use the TLS2200
personal computer. This installer uses a wizard interface to simplify the installation process.
System Requirements
To use the TLS2200
•
Windows 95, 98, NT4.0 or higher with Service Pack 3
•
64MB of RAM
•
15MB of hard drive space
•
One unused serial port
•
Internet connection
Downloading the TLS2200
Complete the following steps to download the Device Loader to your PC from the file available on
the Brady Internet website:
1.
Log onto the Brady website at http://www.bradyid.com/tls2200.
2.
Click <Ver4.0 Device Loader> from the <Products> tab under <Related
Information>.
3.
Follow the Ver4.0 Device Loader instructions to successfully load your new firmware.
4.
Click <Begin Download>.
5.
Click <Save> from the <File Download> window.
6.
Save the file to your desktop.
Installing the TLS2200
Complete the following steps to install the Device Loader on your PC:
1.
Double-click on the <TLS2200
2.
Click <Next> to save the file to C:\Program Files\BradyDeviceLoader (or click
<Browse> to choose a different destination). Click <Next>.
Click next to save the file as Brady TLS2200 Device Loader in the <Start> menu.
3.
4.
Leave the Desktop Icon box checked if you wish to place the program icon on your
desktop (it will still be accessible from your Start menu). Click <Next>.
5.
Click <Install>. Leave the Run Brady Device Loader box checked if you would like to
upgrade the firmware immediately, then click <Finish>.
™
TLS2200
Thermal Transfer Printer User Manual
Device Loader to install new software on your TLS2200
™
Device Loader, you need a PC with the following:
™
Device Loader from the Internet
™
Device Loader
™
Device Loader
Loader.exe> icon from your desktop. Click <Next>.
™
printer using your
71