Chapter 8 Memory; Saving A Label To Memory; Recalling A Label From Memory - Brady IDXPERT User Manual

Chapter 9
Memory
This chapter provides information for saving, retrieving, and deleting labels using the memory
function.
Note: You can create, recall, edit, and save labels on your IDXPERT
without a cartridge. Labels are created and saved based on the attributes of the last
cartridge installed.

Saving a Label to Memory

You may save up to ten labels and then recall them for future use.
Step 1. Press
MEMORY
A grid appears showing 10 storage
locations. Bold numbers indicate
storage locations that are occupied.
Step 2. Use the arrows on your keypad
the grid.
Step 3. Press the
SAVE
option to overwrite it.

Recalling a Label from Memory

Step 1. Press
MEMORY
indicate storage locations that are occupied.
Step 2. Use the arrows on your keypad
the grid. The part number (cartridge)—along with the first line of label text—shows on the
display screen to help you identify the saved legend.
Step 3. Press the
RCL
Caution: Pressing Recall will delete any text you have currently showing on the display
screen.
Note: You must have a part number in the printer that is equal to or greater than (in print
width and height) the part that was used when saving the legend. If the part number is too
small, you will receive this error message: "Cannot Fit"
If you save a label using a new part number, it will be saved with the new part.
44
.
—[▲] [▼]—
softkey If you try to save the legend to an occupied space, you will get the
.
. A grid appears showing 10 storage locations. Bold numbers
—[▲] [▼]—
softkey.
to navigate to the desired storage location on
to navigate to the desired storage location on
Handheld Labeler
TM
Displays part name and
first line of data for
easy retrieval of the
correct label.
User Manual