General Serialization Of Labels - Brady IDXPERT User Manual

Example—
Toggled back to Zone 2 after three zones are created:
Note: The Create Zone process is repeatable for a maximum of three zones using the
General ID Menu (it is repeatable for up to 12 zones if using the DataComm & T-Block
Menu). All characters entered into each zone using the General ID Menu are retained
and can be saved to memory.

General Serialization of Labels

The printer allows you to perform basic alpha or numeric serializations. Serializing a character results
in a series of labels that increment the character by either one number or one letter. For example:
Numeric Serialization when the
serialized character is 3.
Alpha Serialization when the
serialized character is C.
To create labels containing serialized data:
Step 1. Enter the text to be serialized on the desired legend line.
Step 2. Use the arrows on your keypad
in the legend to be serialized.
Step 3. Press .
SERIAL
serial number.
Step 4. Enter the number of times to increment the serial number.
Step 5. Press .
ENTER
serialization to print.
The following example shows 2 copies of a numeric serialization when the serialized
character is 3:
Step 6. Enter the number of copies.
Step 7. Press .
ENTER
40
Display shows user
is in Zone 2 of 3.
123, 124, 125, 126...
ABC, ABD, ABE, ABF...
(left/right) to position the cursor under the character
[◄] [►]
The screen prompts you to enter the number of times to increment the
The screen prompts you to enter the number of copies of the
User Manual