Datacomm & T-Block Menu Basics - Brady IDXPERT User Manual

DataComm & T-Block Menu Basics
This section provides basic instructions on using the DataComm & T-Block Menu as well as an
overview of the menu selections. Use the menu and related softkeys to perform many of the label
formatting commands.
Note: See Chapter 6— Creating Labels Using the DataComm & T-Block Menu for more
information. Also see Appendix B—DataComm & T-Block Menu Tree.
To access the DataComm & T-Block Menu:
Start-Up Display Screen
Step 1. Press
ENTER
The Select DataComm Application display screen appears:
Step 2. Press to advance to the next set of menu options:
NEXT
At this point, pressing
NEXT
of menu options is reached.
Pressing
CLEAR/ESC
General ID display screen.
After returning to the General ID display screen, pressing
the start-up display screen.
User Manual
Upon returning to the start-up display (or by turning the power off
and on), the General ID Menu is highlighted by default. Use the
blue softkeys beneath the up/down arrows to toggle to the
DataComm & T-Block Menu.
to select the DataComm & T-Block Menu.
again cycles back to the first set of menu options when the last set
exits the DataComm & T-Block menu mode and returns you to the
+ returns you to
FUNCTION MENU
11