Chapter 9 Memory; Saving A Label To Memory; Recalling A Label From Memory - Brady LabXpert User Manual

Chapter 9
Memory
This chapter provides information on saving, retrieving, and deleting labels using the memory
function.
Note: You can create, recall, edit, and save labels on your LABXPERT
Labeling System without a cartridge. Labels are created and saved based on the
attributes of the last cartridge installed.

Saving a Label to Memory

You may save up to ten labels and then recall them for future use.
To save a label to memory:
1. Press [MEMORY].
A grid appears showing the 10 storage
locations. A bold number indicates a storage
location is occupied. Additionally, the first line
of text and part name are displayed for easy
retrieval of the correct label.
2. Use the arrows on your keypad
the grid.
3. Press [SAVE]. If you try to save the legend to an occupied space, you will get the option
to overwrite it.

Recalling a Label from Memory

To recall a label from memory:
1. Press [MEMORY].
2. The grid appears showing the 10 storage locations, saving the label to memory. A bold
number indicates a storage location is occupied.
3. Use the arrows on your keypad
the grid. The part number (cartridge)
display to help you identify the saved legend.
4. Press [RCL].
Caution: Pressing Recall will delete any text you have currently showing on the display
screen.
Note: You must have a part number in the printer that is equal to or greater than (in print
width and height) the part that was used when saving the legend. If the part number is too
small, you will receive this error message: Cannot Fit
If you save a label using a new part number, it will be saved with the new part.
34
to navigate to the desired storage location on
– [▲] [▼] –
to navigate to the desired storage location on
– [▲] [▼] –
along with the first line of label text
–
TM Laboratory
shows in the
–
User Manual