Memory Card Functions In The Offline Menu; Loading Label - Brady BP-PR 300 PLUS Series User Manual

BP-PR PLUS Series
8-4

Memory Card Functions in the Offline Menu

Accessing the Memory card menu is only possible if a memory card is installed.
You can still only operate the card slot set in the menu Interfaces > Default card slot via
the operating panel (see 4-1-4 Interfaces on page 21). When operating via an interface,
each card slot can be addressed via a path.

8-4-1 Loading Label

You can print labels whose descriptions are saved on the memory card using the Label
from card function.
1. Select the Label from card function in the Memory card menu.
2. Press the
3. Select the desired label in the index of the card with the
4. Press the
5. Enter the label quantity/variable data with the following buttons:
6. Press the
Canceling input:
You can cancel the selection of the label and the label quantity at any time by pressing
and holding the
52
button. The name of the label found at the top of the index of the card
is displayed.
button. If you have selected a label which was saved with a fixed label
quantity, the print job is started immediately.
For label descriptions with a variable label quantity, you are requested by the
display to enter the label quantity
required, the display requests you to enter the variable data
cursor left
cursor right
increase value at cursor position by 1 or select next letter in alphabet
decrease value at cursor position by 1 or select previous letter in alphabet
button briefly to confirm the input and start the print job.
button (at least 2 seconds).
. If additional input on the label description is
User Manual
and buttons.
.
Edition 04/10