Table of Contents
Advertisement
Functions of the Control Panel in the Offline Menu
The Offline Menu contains options to set machine and print parameters, to enter test and service
functions as well to operate with the memory card.
To enter this mode press the
display shows "Memory card". Otherwise "Test" will be displayed.
Ready
Menus and options marked with * can be protected by a PIN from unauthorized access.
Functions marked with [...] are only accessible, if an optional device has been installed.
Table 1 Structure of the Offline Menu
After switching from the "Ready" mode into the Offline Menu the function of the keys are changed. Now
the keys of the Navigator Pad have the function of cursor keys.
Fig. 18 Navigator Pad in the Offline Menu
During selection of the test and service functions the display shows the selected function. In the "Setup"
menu, the display shows the selected parameter and the current setting of the parameter.
A graphic symbol accompanies the text.
Fig. 19 Display during selection of a function (left) / selection of a setup parameter (right)
Printer Applicator System PAM 3600
key while in the Ready mode. If a memory card is installed the
[Memory Card]
Test
Setup *
Service
Key
Function
- Move up in the menu
- Increase numeric values
- Move down in the menu
- Decrease numeric values
- Switch to a secondary menu
- Move the cursor to the right during numeric settings
- Finish a setting with confirmation of the selected settings
- Start of a selected test or service function
- Return from a secondary menu
- Move the cursor to the left during numeric settings
- Finish a setting with rejecting the selected settings
- At the start of the menu, return to the system mode "Ready"
Label from Card
Print directory
Copy memory card *
Format card *
ASCII dump (Card)
Short status
Status print
Font list
Device list
ASCII Dump mode
Test grid
Label profile
Local settings
Machine parameters
Print parameters
Interfaces
Security
Firmware upd. *
Control Panel
19
Advertisement
Table of Contents
