Brady BP-PR 300 PLUS Series User Manual page 60

BP-PR PLUS Series
You can prevent unauthorized copying of memory cards by using a PIN (see 4-1-6
Security on page 24).
1. Insert original card. (see 8-1 Insertion and Removal on page 50)
2. Press the menu button.
3. Select Memory card > Copy memory card with the buttons
4. Press the
5. Use the
6. Press the
7. If the function Copy memory card is protected via a PIN, use the
8. Remove original card and insert the card to be written to. The data read from the
9. Remove copy card and insert original card again. The next copy cycle begins.
10. Repeat the previous two steps until all data has been copied. OK displays when
11. Press the
54
button. A selection field with the selection No appears in the display.
and buttons to select Yes.
button.
buttons to enter the code number and confirm with the
The copying procedure starts. When copying larger amounts of data, the copying
procedure is carried out in several copying cycles. An increasing progress
indicator is shown in the display during a copy cycle. The Insert dest. instruction
then appears.
original card is transferred to the copy card. The progress indicator in the display
shrinks during this process. If only part of the data from the original card was read
out, the Insert source instruction appears.
the entire copying procedure is complete.
button.
If the card to be written to can no longer accept data during the copying
procedure, the Card full error message appears in the display.
User Manual
and
, , and
button.
Edition 04/10