Replacing A Label File - Brady BMP21 User Manual

File Management

Replacing a Label File

To replace a file previously saved:
1. Press
2. Press
- or -
Press
3. Select any symbol and Enter
4. Type: SAMPLE
5. Press
6. Press Enter
7. Select Save, the press Enter
8. Move the cursor to the number and name of your last saved label, then press
Enter .
9. When prompted to replace the file, select Yes.
10. Type the label file name: NEW, then press Enter
11. Press
BMP21 User Guide
+ to clear your editor.
, then select Symbol.
+ .
.
, then select File.
.
.
+ to clear the display
.
.
13