Management Buttons - Cisco SD208T-NA Administration Manual

Getting Started
Window Navigation
Cisco Small Business 200 Series Smart Switch Administration Guide

Management Buttons

The following table describes the commonly-used buttons that appear on various
pages in the system.
Management Buttons
Button Name
Add
Apply
Cancel
Clear All
Interfaces
Counters
Clear Interface
Counters
Clear Logs
Clear Table
Close
Description
Use the pull-down menu to configure the number of
entries per page.
Indicates a mandatory field.
Click to display the related Add page and add an entry to a
table. Enter the information and click Apply to save it to the
Running Configuration. Click Close to return to the main
page. Click Save to display the Copy/Save Configuration
page and save the Running Configuration to the Startup
Configuration file type on the switch.
Click to apply changes to the Running Configuration on the
switch. If the switch is rebooted, the Running Configuration
is lost, unless it is saved to the Startup Configuration file
type or another file type. Click Save to display the Copy/
Save Configuration page and save the Running
Configuration to the Startup Configuration file type on the
switch.
Click to reset changes made on the page.
Click to clear the statistic counters for all interfaces.
Click to clear the statistic counters for the selected
interface.
Clears log files.
Clears table entries.
Returns to main page. If any changes were not applied to
the Running Configuration, a message is displayed.
1
15