Configuring Voice Vlan - Cisco SD208T-NA Administration Manual

VLAN Management
Voice VLAN
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Apply.
Configure Smartports as described in the
Configure LLDP/CDP as described in the
CDP sections, respectively.
Enable the Smartport feature on the relevant ports using the Smartport >
Interface Settings page.
Step 7 and Step 8 are optional as they are enabled by default.
NOTE
Workflow2: To configure the Telephony OUI Method
VLAN Management >
Open the
Voice VLAN to Enable Telephony OUI.
If the device is currently in Auto Voice VLAN mode, you must disable
NOTE
it before you can enable Telephony OUI.
Configure Telephony OUI in the Telephony OUI page.
Configure Telephony OUI VLAN membership for ports in the Telephony OUI
Interface page.

Configuring Voice VLAN

This section describes how to configure voice VLAN. It covers the following
topics:
• Configuring Voice VLAN Properties
• Displaying Auto Voice VLAN Settings
• Configuring Telephony OUI
Common Smartport Tasks
Configuring LLDP
Voice VLAN > Properties page. Set Dynamic
12
section.
and Configuring
172