Table of Contents
Advertisement
Configuring IP Information
Domain Name Systems
STEP 4
Cisco Small Business 200 Series Smart Switch Administration Guide
•
IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The
options are:
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
-
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface—If the IPv6 address type is Link Local, select whether
it is received through VLAN2 or ISATAP.
•
Host Name—Enter a domain name, up to 158 characters.
•
IP Address—Enter an IPv4 address or enter up to four IPv6 host addresses.
Addresses 2–4 are backup addresses.
Click Apply. The DNS host is written to the Running Configuration file.
16
224
Hide quick links:
Advertisement
Table of Contents
