Management Buttons - Cisco 200 Series Administration Manual

Getting Started
Quick Start Switch Configuration
Cisco Small Business 200 Series Smart Switch Administration Guide

Management Buttons

The following table describes the commonly-used buttons that appear on various
pages in the system.
Management Buttons
Button Name Description
Navigate the table by using the right and left arrow icons
when there are more than 50 entries in a table.
Indicates a mandatory field.
Add Click to display the related Add page and add an entry to a
table. Enter the information and click Apply to save it to the
Running Configuration. Click Close to return to the main
page. Click Save to display the Copy/Save Configuration
Page and save the Running Configuration to the Startup
Configuration file type on the switch.
Apply Click to apply changes to the Running Configuration on the
switch. If the switch is rebooted, the Running Configuration
is lost, unless it is saved to the Startup Configuration file
type or another file type. Click Save to display the Copy/
Save Configuration Page and save the Running
Configuration to the Startup Configuration file type on the
switch.
Cancel Click to reset changes made on the page.
Clear All Click to clear the statistic counters for all interfaces.
Interfaces
Counters
Clear Interface Click to clear the statistic counters for the selected
Counters interface.
Clear Logs Clears log files.
Clear Table Clears table entries.
Close Returns to main page. If there are changes that were not
applied to the Running Configuration, a message is
displayed.
1
15