Configuring Discovery
Configuring LLDP
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
To view LLDP overloading information:
Click Administration > Discovery - LLDP > LLDP Overloading. The
Overloading
page opens.
This page displays the following fields for each port:
•
Interface—Port identifier.
•
Total (Bytes)—Total number of bytes of LLDP information in each packet
•
Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
•
Status—Whether TLVs are being transmitted or if they are overloaded.
To view the overloading details for a port, select it and click Details. The LLDP
Overloading Details opens.
This page displays the following information for each TLV sent on the port:
•
LLDP Mandatory TLVs
-
Size (Bytes)—Total mandatory TLV byte size.
-
Status—If the mandatory TLV group is being transmitted, or if the TLV
group was overloaded.
•
LLDP MED Capabilities
-
Size (Bytes)—Total LLDP MED capabilities packets byte size.
-
Status—If the LLDP MED capabilities packets were sent, or if they were
overloaded.
•
LLDP MED Location
Size (Bytes)
-
Status
-
—If the LLDP MED locations packets were sent, or if they were
overloaded.
•
LLDP MED Network Policy
Size (Bytes)
-
Status
-
—If the LLDP MED network policies packets were sent, or if they
were overloaded.
•
LLDP MED Extended Power via MDI
—Total LLDP MED location packets byte size.
—Total LLDP MED network policies packets byte size.
8
LLDP
90