Cisco SD208T-NA Administration Manual page 60

System Time
Configuring System Time
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Apply to update the switch.
Add SNTP Authentication
Click Add. The
Enter the following parameters:
• Authentication Key ID—Enter the number used to identify this SNTP
authentication key internally.
• Authentication Key—Enter the key used for authentication (up to eight
characters). The SNTP server must send this key for the switch to
synchronize to it.
• Trusted Key—Select to enable the switch to receive synchronization
information only from a SNTP server by using this authentication key.
Click Apply. The SNTP Authentication parameters are written to the Running
Configuration file.
page opens.
6
61