Cisco SD208T-NA Administration Manual page 45

General Administrative Information
System Information
System Information
Cisco Small Business 200 Series Smart Switch Administration Guide
The System Summary page provides a graphic view of the switch, and displays
switch status, hardware information, firmware version information, general PoE
status, and other items.
Displaying the System Summary
To view system information, click Status and Statistics > System Summary. The
System Summary page opens.
The System Summary
System Information:
• System Description—A description of the system.
• System Location—Physical location of the switch. Click Edit to go the
System Settings page to enter this information.
• System Contact—Name of a contact person. Click Edit to go the System
Settings page to enter this information.
• Host Name—Name of the switch. Click Edit to go the System Settings
page to enter this information. By default, the switch hostname is composed
of the word switch concatenated with the three least significant bytes of the
switch MAC address (the six furthest right hexadecimal digits).
• System Uptime—Time that has elapsed since the last reboot.
• Current Time—Current system time.
• Base MAC Address—Switch MAC address.
• Jumbo Frames—Jumbo frame support status. This support can be
enabled or disabled by using the Port Settings page of the Port
Management menu.
Jumbo frames support takes effect only after it is enabled, and after
NOTE
the switch is rebooted.
TCP/UDP Services Status:
• HTTP Service—Displays whether HTTP is enabled/disabled.
• HTTPS Service—Displays whether HTTPS is enabled/disabled.
page displays system and hardware information.
5
46