For Bulk Insertion Of Users And Phones After Initial Deployment; Network Tab Settings - Cisco IE-3000-8TC Administration Manual

Network Tab Settings

• The system validates most of the data from the Cisco-provided .xls data configuration file when you
• If you add user and phone information to the Cisco-provided .xls data configuration file for your initial
•

For Bulk Insertion of Users and Phones After Initial Deployment

If you use the Cisco-provided .xls data configuration file to insert phones and users in bulk after the initial
deployment, the system ignores all tabs except for the Users and Phones tabs.
To import users and phones in bulk after the initial deployment, you access the Search Users or Search Phones
pages in the Cisco Business Edition 3000 Administrative Interface. (Click Import Users/Phones)
You cannot add a phone unless the following criteria are met:
• A user with an assigned extension is already configured in the system
• A user with an assigned extension is added to the Cisco-provided .xls data configuration file (Make sure
• Always verify that the user and assigned extension exist. If you plan to add a phone through the
Network Tab Settings
The Network tab allows you to specify the hostname and IP address for the Cisco Business Edition 3000
server, the subnet mask, default gateway, and DNS settings (if you plan to use DNS). To update the Link
Speed and MTU size, as described in the
the Cisco Business Edition 3000 Administrative Interface.
The following table describes the settings that display under the Network tab.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
78
upload it in the Cisco Business Edition 3000 First Time Setup Wizard. User and phone configuration is
not validated until after the server restarts.
deployment, the Post-Setup wizard, which displays after you log in to the Cisco Business Edition 3000
Administrative Interface, allows you to insert the user and phone configuration immediately in the
system. (The configuration does not get inserted in the system until you click the button that initiates
the insertion.)
Before you run the Cisco Business Edition 3000 First Time Setup Wizard, you can copy
Warning
the configure.xml file, licenses, Cisco-provided .xls data configuration file,
Cisco-provided country pack, localized greeting for auto attendant, and music on hold
source audio file to a single USB flash drive. Insert the key, and then run the Cisco
Business Edition 3000 First Time Setup Wizard. After you run the Cisco Business
Edition 3000 First Time Setup Wizard and the server restarts, you may keep the USB
flash drive inserted in the server, which allows you to perform additional tasks, such as
uploading the greeting and music on hold source audio file to the Cisco Business Edition
3000 Administrative Interface.
For More Information
USB Support, on page 5
that you select a usage profile for the user, too.)
Cisco-provided .xls data configuration file, make sure that you add at least one user extension to the
Line cell under the Phone tab. Otherwise, the phone configuration fails to get inserted into the system.
Network Settings, on page 245, select Connections > Network in
OL-27022-01