Block Rules Tab Settings; Abbreviated Dialing Tab Settings - Cisco IE-3000-8TC Administration Manual

Block Rules Tab Settings

The following table describes the settings for the Blocking Rules tab.
Table 10: Settings on the Block Rules tab
Settings
Beginning Digits
Total Digits
Description

Abbreviated Dialing Tab Settings

The following table describes the settings for the Abbreviated Dialing tab.
Table 11: Settings on the Abbreviated Dialing tab
Settings
Digits Dialed by User
Final Outgoing Number
Description
OL-27022-01
Description
Enter the beginning digits of the number you want to
block. The number of beginning digits must not
exceed the total number of digits. The beginning digits
must not exceed more than 24 characters.
Use + (Plus) symbol as prefix for
Note
configuring E164 numbers.
Enter the total number of digits in the called party
number.
Enter a description to identify the abbreviated dialing
rule.
Description
• Specify the beginning dial code.
The beginning dial code must be specific with
the dial plan.
• From the drop-down list, select the number of
digits to be dialed after the dial code.
• Specify the Final Outgoing number for the dial
code.
• From the drop-down list, specify the number of
digits to be dialed apart from the dial code
Enter a description to identify the abbreviated dialing
rule.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
Block Rules Tab Settings
83