Carrier Selection Profiles For Brazil - Cisco IE-3000-8TC Administration Manual

Components of the Cisco Business Edition 3000 System
2 Validation—The Cisco Business Edition 3000 validates the connection pack and the version based on the
checksum before upgrade.
3 Installation—The connection pack is installed on the Cisco Business Edition 3000. A progress bar depicts
the status of the upgrade. You cannot cancel the upgrade process after the installation process is initiated.
The Cisco Business Edition 3000 Administrative Interface notifies the status of installation as a progress bar.
If there are PSTN connections using the connection pack that is upgraded, the Administrative Interface notifies
that the connection will be reset and all the calls associated with SIP trunk using that connection pack are
dropped. The Cisco Business Edition 3000 Administrative Interface will request confirmation. If you choose
to cancel, the installation process will be terminated and there will be no impact on the current connection
and service provider. If you confirm to upgrade, the upgrade process begins.
After you upgrade the connection pack successfully, a confirmation message appears indicating that the
connection pack was successfully installed. The connection pack upgrade process takes 2 to 7 minutes if you
confirm to upgrade, and 2 to 4 minutes if you choose to cancel the upgrade.
The advance settings of the SIP trunk connections will be updated with the new set of parameters through the
connection pack file. After the connection pack upgrade is complete, the SIP trunk connection will be reset
and active calls will be dropped.
Upgrade failure handling
If the upgrade fails during validation (for example, if you have a corrupt .cop.sgn file) or installation (for
example, if you have an invalid provider XML file), the upgrading process stops and the Administrative
Interface displays a message to reboot the system. It is mandatory to reboot the system if this error is
encountered. For more information, see
The Cisco Business Edition 3000 allows you to revert to the previous version of the connection pack. You
can achieve this by upgrading the system using the connection pack of the desired version.
Impact during Cisco Business Edition 3000 Upgrade
The SIP trunk connection will be reset while the Cisco Business Edition 3000 is upgrading. All the active
calls will be dropped.
The upgrading of the new Cisco Business Edition 3000 may result in change of various parameters on the
Administrative Interface. Some parameters can be removed and new parameters may be introduced. The
user-configured SIP trunk parameter settings will be saved after upgrade also.

Carrier Selection Profiles for Brazil

This section is applicable if you have installed a Brazil country pack using the Cisco Business Edition 3000
First Time Setup Wizard.
In Brazil, the user has to specify a carrier selection code to place a long distance or an international PSTN
call. Carrier Selection Profiles allow subscribers to choose a service provider and configure a carrier selection
code for national or international calls. You can configure the Carrier Selection Profiles for long distance,
international and mobile calls through the Cisco Business Edition 3000 Administrative Interface.
You can configure Carrier Selection Profiles on the Cisco Business Edition 3000 Administrative Interface
Note
only if you have installed the Brazil country pack through the Cisco Business Edition 3000 First Time
Setup Wizard during the initial setup.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
30
Troubleshooting Issues, on page 427.
OL-27022-01