Delete A Spa8800 Analog Phone From The Phones Page; Edit Spa8800 Devices From The Devices Page; Delete Spa8800 Devices From The Devices Page; Did And Elin Configuration - Cisco IE-3000-8TC Administration Manual

Components of the Cisco Business Edition 3000 System

Delete a SPA8800 analog phone from the Phones page

Procedure
Step 1 To delete a phone, click the Delete button for that phone in the Phones table.
Step 2 The delete will not occur for Phone 1 if Line 1 is not configured and the user the user will get a message
telling them that the port is a master port and it can only be deleted as part of the SPA8800 device deletion.
In all other cases the device reset dialog box will appear notifying the user that the SPA8800 device will be
reset and all calls of the associated phones and PSTN connections will be disconnected.
Step 3 The phone is removed from the Phones page.
Note

Edit SPA8800 devices from the Devices page

Procedure
Step 1 In the Devices page, locate the SPA8800 you wish to edit and click the Edit button under the Actions column.
The Edit window appears.
Step 2 From this window, you can edit the MAC address, IP address, description, and advanced settings.
Step 3 Click Save in the Edit window to return to the Devices page.
Any change made on the SPA8800 connection and phone will cause the SPA8800 to reboot. Reboots for
configuration changes can take several minutes to take effect.

Delete SPA8800 devices from the Devices page

Procedure
Step 1
To delete an SPA8800, locate the SPA8800 you wish to delete and click the Delete button in the Actions
column.
The Confirm Delete window appears. Listed in this window are all phones and PSTN connections associated
with this SPA8800.
Step 2 Click Delete to confirm deletion of the SPA8800.
Note

DID and ELIN configuration

DIDs for the trunk is configured on the same page as translation patterns, attendant numbers, directory numbers,
or hunt lists in order to route incoming calls. Simply placing a DID on a trunk does not allow it to associate
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
22
Any change that you make on the SPA8800 connection and phone causes the SPA8800 to reboot.
Reboots for configuration changes can take several minutes to take effect.
If the SPA8800 you wish to delete has one or more FXO connections that are configured for emergency
calling, any associated ELINs will be removed.
Any change made on the SPA8800 connection and phone will cause the SPA8800 to reboot. Reboots
for configuration changes can take several minutes to take effect.
OL-27022-01