Copying (Duplicating) Configuration; Mcs 7890-C1 Will Not Power Up. Why Not - Cisco IE-3000-8TC Administration Manual

Copying (Duplicating) Configuration

• Sites - Select Connections > Sites.
Step 2 To edit an item, click Edit.
The Edit page displays. Make the necessary changes, and click Save.
Step 3 You can edit the date and time for the server and phones, the network settings for the server, gateway
configuration information, dial plan, administrator username and password, and voice features that impact
the entire system through the System Settings menu; for example, to update the network settings for the server,
select Connections > Network. The configuration page displays where you can edit the information. After
you edit the information, click Save.
Copying (Duplicating) Configuration
You can copy (duplicate) the entire configuration from a usage profile so that you can easily add a new usage
profile. You can make a copy of the usage profile, easily modify the settings to retain any configuration that
you want to use, and then add the new usage profile to the GUI by using the following procedure. You cannot
copy more than one usage profile at a time.
Procedure
Step 1 Find the usage profile that you want to copy, as described in the
Step 2 For the usage profile that you want to copy, click Duplicate.
Step 3 The configuration displays where you can modify it. Make sure that you give the configuration a new name.
Step 4
To add the new usage profile, click OK.

MCS 7890-C1 will not power up. Why not?

When starting the MCS 7890-C1 for the first time, or following a power outage, perform the following
procedure.
Procedure
Step 1 Move the MCS 7890-C1 back panel power switch to the on position (|).
Step 2
The front power button illuminates, as shown in the following illustration. If the light fails to illuminate, press
the front power button.
Figure 5: MCS 7890-C1 power button
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
72
Finding Your Configuration, on page 69.
OL-27022-01