The System Has Reached Maximum Capacity For Calls Going Through The Telephone Network; The System Is Nearing Maximum Call Capacity; The System Has Experienced An Internal Software Error And Must Be Restarted - Cisco IE-3000-8TC Administration Manual

Administration guide
Hide thumbs Also See for IE-3000-8TC:
Table of Contents

Advertisement

The system has reached maximum capacity for calls going through the telephone network

The system has reached maximum capacity for calls going through the
telephone network
Problem
Solution
• Verify that a loop call is not being generated.
• Investigate system usage for high volume by reviewing the reports on the Call Detail Reports page
• If only one PRI interface is purchase and provision additional telephone circuits.
Note
An error message displays on the Health Summary page if the system reaches the maximum capacity
for the PSTN calls. This error message continues to display on the Health Summary page for the next
60 minutes after the condition clears.

The system is nearing maximum call capacity

Problem
Solution
• Review the reports for high call volume on the Call Detail Reports page (Monitoring > Call Detail
• If call volume is not high, monitor the system to verify that dial tone is not impaired. (Dial tone is
• If the issue occurs again, perform the following tasks:

The system has experienced an internal software error and must be restarted

Problem
Solution
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
438
Too many inbound/outbound calls have caused the external call resources to be low.
Perform any of the following actions:
(Monitoring > Call Detail Reports).
The amount of resources that are being utilized is nearing capacity, which could cause system issues.
Perform any of the following actions:
Reports).
impaired if it is noticeably delayed after picking up a handset.) If dial tone is impaired, restart the server.
◦ Enable tracing on the Diagnostics page (Monitoring > Diagnostics).
◦ Attempt to reproduce the issue.
◦ Generate a log file on the Diagnostics page, and download the log file to your PC.
◦ Send the log file to the technical support team; for example, contact your Value Added Reseller
(VAR), or if you are the Value Added Reseller, contact the Cisco Technical Assistance Center
(TAC).
A critical internal issue occurred.
Perform any of the following actions:
OL-27022-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Business edition 3000

Table of Contents