Removing Snmp Traps - 3Com 3CBLSF26PWRH User Manual

Figure 3-67 SNMP Traps Setup Page
The SNMP Traps Setup Page contains the following fields:
Table 3-53 SNMP Traps Setup Page item description
Item
Recipients IP Address
Community String
Trap Version

Removing SNMP Traps

The SNMP Traps Remove Page allows the system manager to remove SNMP Traps.
Click Administration > SNMP > Traps > Remove. The SNMP Traps Remove Page opens.
Figure 3-68 SNMP Traps Remove Page
To Remove SNMP Traps:
1) Select the SNMP Traps.
2) Click Remove.
Defines the IP address to which the traps are sent.
Defines the community string of the trap manager.
Defines the trap type. The possible field values are:
SNMP V1: Indicates that SNMP Version 1 traps are sent.
SNMP V2c: Indicates that SNMP Version 2 traps are sent.
3-60
Description