Configuring Acl Binding - 3Com 3CBLSF26PWRH User Manual

Item
Source IP Address
Source Mask
Destination IP
Address
Destination Mask
DSCP
IP Precedence
Action

Configuring ACL Binding

This section includes the following topics:
Defining ACL Binding
Removing ACL Binding
Viewing ACL Binding
Defining ACL Binding
The ACL Binding Setup Page allows the network administrator to bind specific ports to MAC or IP based
ACLs.
Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup Page opens.
Figure 3-46 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Table 3-35 ACL Binding Setup Page item description
Item
Bind ACL
Select ACL
Matches the source IP address to which packets are addressed to the ACL.
Indicates the source IP address mask.
Matches the destination IP address to which packets are addressed to the
ACL.
Indicates the destination IP address mask.
Matches the packet DSCP value to the ACL. Either the DSCP value or the IP
Precedence value is used to match packets to ACLs.
Indicates matching ip-precedence with the packet IP precedence value.
Indicates the ACL forwarding action. In addition, the port can be shut down, a
trap can be sent to the network administrator, or packet is assigned rate
limiting restrictions for forwarding.
Assigns ACL type
Selects the ACL from a list of previously defined ACLs to which the port can
be bound.
3-44
Description
Description