Table of Contents
Advertisement
SNMP Traps
An SNMP trap is an asynchronous report of one of several events. To receive
reports, you must configure the IP address of the network management
station (NMS) to which the reports are sent; otherwise, the reports are
discarded. Through SNMP and your network management software or
through the Administration Console, you can configure which traps are sent
to which IP addresses.
Table 3-1 lists the SNMP traps supported by the LANplex system.
Table 3-1 SNMP Traps in the LANplex 2500 system
Group
MIB II
Bridge MIB
LANplex
LANplex
(SMT 7)
For descriptions of these traps, see the ASN.1 MIB definition files included
with your software release.
Trap
coldStart
authenticationFailure
newRoot
topologyChange
®
System MIB
lpsSystemOverTemperatureEvent
lpsBridgeAddressThresholdEvent
lpsSystemFanFailureEvent
®
Optional FDDI MIB
lSMTHoldCondition
lSMTPeerWrapCondition
MACDuplicateAddressCondition
MACFrameErrorCondition
MACNotCopiedCondition
MACNeighborChangeEvent
MACPathChangeEvent
PORTLerCondition
PORTUndesiredConnAttemptEvent
PORTEBErrorCondition
PORTPathChangeEvent
SNMP
3-5
Advertisement
Table of Contents
