Configuring Ip And Mac Address Information; Defining Ip Address - 3Com 3CBLSF26PWRH User Manual

Table 3-3 System Access Summary Page item description
Item
User Name
Access Level

Configuring IP and MAC Address Information

This section contains information for defining IP interfaces, and includes the following sections:

Defining IP Address

Configuring ARP Settings
Configuring MAC Address Table
Defining IP Address
To enable the other devices on the network to communicate with the switch, you need to assign an IP
address to it: either by DHCP or by assigning a static IP address.
Click Administration > IP Setup. The IP Setup Page opens.
Figure 3-5 IP Setup Page
The IP Setup Page contains the following fields:
Table 3-4 IP Setup Page item description
Item
Configuration Method
IP Address
Subnet Mask
Gateway
Displays the user name.
Displays the user access level.
Defines whether the IP address is configured statically or dynamically. The
possible field values are:
Static: Specifies that the IP address is configured by the user.
DHCP: Specifies that the IP address is dynamically obtained by DHCP
Server.
Defines the IP address. The default value is 169.254.xxx.xxx. If the MAC
address is 08004E000102, the IP address would be 169.254.1.2.
Defines the subnet mask. The default value is 255.255.0.0.
Defines the gateway address. The default value is blank.
3-4
Description
Description