Configuring Trust Mode; Configuring Bandwidth Settings - 3Com 3CBLSF26PWRH User Manual

Table 3-44 DSCP to Queue Summary Page item description
Item
DSCP
CoS

Configuring Trust Mode

The Trust Setup Page contains information for configuring trust mode on the switch.
Click Device > QoS > Trust > Setup. The Trust Setup Page opens.
Figure 3-56 Trust Setup Page
The Trust Setup Page contains the following fields:
Table 3-45 Trust Setup Page item description
Item
Trust Mode

Configuring Bandwidth Settings

Defining Bandwidth Settings
The Bandwidth Setup Page allows network managers to define the bandwidth settings for a specified
interface.
Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page opens.
Displays the incoming packet's DSCP value.
Indicates the CoS value forwarding queue to which the DSCP priority is
mapped. The possible field values are 0-7.
Specifies which packet fields to use for classifying packets entering the
switch. When no rules are defined, the traffic containing the predefined
packet CoS field is mapped according to the relevant trust modes table.
Traffic not containing a predefined packet field is mapped to "best effort".
The possible Trust Mode field values are:
CoS: Classifies traffic based on the CoS tag value.
DSCP: Classifies traffic based on the DSCP tag value.
3-51
Description
Description