Configuring Ip Based Acl - 3Com 3CBLSF26PWRH User Manual

Item
CoS
CoS Mask
Ethertype
Action

Configuring IP Based ACL

This section includes the following topics:
Defining IP Based ACL
Modifying IP Based ACL
Removing IP Based ACL
Viewing IP Based ACL
Defining IP Based ACL
The IP Based ACL Setup Page allows network managers to define IP Based ACL.
Click Device > ACL > IP Based ACL > Setup. The IP Based ACL Setup Page opens.
Figure 3-42 IP Based ACL Setup Page
The IP Based ACL Setup Page contains the following fields:
Table 3-32 IP Based ACL Setup Page item description
Item
Selection ACL
Create ACL
Priority
Classifies traffic based on the CoS tag value.
Displays the CoS mask used to filter CoS tags.
Provides an identifier that differentiates between various types of protocols.
Indicates the ACL forwarding action. In addition, the port can be shut down, a
trap can be sent to the network administrator, or packet is assigned rate
limiting restrictions for forwarding. The possible field values are:
Permit: Forwards packets which meet the ACL criteria.
Deny: Drops packets which meet the ACL criteria.
Selects an existing IP-based ACL to which rules are to be added.
Defines a new user-defined IP-based Access Control List. The options are
as follows:
ACL Priority: Sets the ACL priority. The possible field values are 1-100.
Rule Priority Type: Sets the rule priority type. CONFIG: You will have to
configure the ACL rule priority by yourself, AUTO: the ACL rule priority
will be configured automatically.
Sets the rule priority, which determines which rule is matched to a packet on
a first-match basis. The possible field values are 1-65535.
3-40
Description
Description