Figure 3-22 Modify VLAN Page
The Modify VLAN Page contains the following fields:
Table 3-17 Modify VLAN Page item description
Item
Select a VLAN to
modify
Select membership
type
Untagged
membership
Tagged membership
By default, all ports belong to VLAN 1 as an untagged member. However, they can belong to multiple
VLANs as a tagged member. Also, newly created VLANs will initially have no ports associated with
them.
Modifying Port VLAN Settings
The Modify Port VLAN Page allows the network manager to modify port VLAN settings.
Click Device > VLAN > Modify Port. The Modify Port VLAN Page opens.
Selects a VLAN to modify its settings.
Selects the membership type for each port on the VLAN. The possible field
values are:
Untagged: Indicates the interface is an untagged member of the VLAN.
Tagged: Indicates the interface is a tagged member of a VLAN. VLAN
tagged frames are forwarded by the interface. The frames contain VLAN
information.
Not A Member: Indicates the interface is not a member of the VLAN.
Not available for selection: Indicates the interface is not available for
selection.
Indicates the port is an untagged member of the VLAN.
Indicates the port is a tagged member of a VLAN. VLAN tagged frames are
forwarded by the interface. The frames contain VLAN information.
3-20
Description