Installing The Printer Via Bluetooth (Bluetooth Model); Activating Bluetooth; Usb Installation And Bluetooth Printing From Computer In Windows Environment - Olivetti SIMPLE_WAY User Manual

INSTALLING THE PRINTER VIA BLUETOOTH (BLUETOOTH MODEL)

Printing over the Bluetooth wireless connection is possible if this capability is integrated in the
computer, or if an external Bluetooth device is installed (e.g. a Bluetooth USB pen). The Bluetooth
function must be active on the printer.
The range of the Bluetooth system is usually around 10 metres but this can vary according to the
characteristics of the environment in which it is installed.
The printer supports the Bluetooth 1.2 Class 2 communications system for connecting to compatible
computers and cell phones.
The installation method varies according to the type of printer use.

Activating Bluetooth

The printer is configured for using Bluetooth from compatible cell phones and does not require any
type of installation.
To verify if the Bluetooth capability is available, see if the blue LED of the Bluetooth icon is ON.
If it is OFF, proceed as follows:
• In the Windows environment:
1 Carry out USB installation as described in the documentation "Setting up Your Printer"
note: If installation has already been performed, it is not necessary to repeat it.
2 Open the Toolbox program (Start > Programs> Olivetti> Olivetti Toolbox).
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access Bluetooth parameter
configuration.
4 Enable Bluetooth mode and click on "Send settings": wait for the data of the Bluetooth network
present to be automatically received: the blue light on the printer illuminates.
Close the "Toolbox" program.
5 The printer is now able to operate in the Bluetooth environment.
If a password is requested during the connection phase, enter "0000" (or other, user-defined,
password) using the "Toolbox" application (Start > Programs> Olivetti> Olivetti Toolbox).
• In the Mac OS X environment:
1 Carry out USB installation as described in the documentation "Setting up Your Printer".
note: If installation has already been performed, it is not necessary to repeat it.
2 Run the Toolbox program from the desktop.
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access Bluetooth parameter
configuration.
4 Click on "Bluetooth Status". Activate Bluetooth mode and wait for the data of the Bluetooth
network present to be automatically received: press "Apply".
Close the "Toolbox" program.
5 The printer is now able to operate in the Bluetooth environment.
If a password is requested during the connection phase, enter "0000" (or other, user-defined,
password) using the "Toolbox" application (Start > Programs> Olivetti> Olivetti Toolbox).

USB Installation and Bluetooth Printing from Computer in Windows Environment

Printing on the Bluetooth wireless connection is possible if this capability is integrated in the computer,
or if an external Bluetooth device is installed (e.g. a Bluetooth USB pen). The Bluetooth function must
be active on the printer.
• In the Windows environment
1 Carry out USB installation as described in the documentation "Setting up Your Printer".
2 Activate Bluetooth mode on the computer (depends on the Bluetooth device installed).
Make a note of the COM port that the Windows system has assigned to the Bluetooth channel (on
Windows Xp, the Bluetooth icon is available in the systray to search for the connected devices; for
other operating systems, consult the provider's manual).
10 CHAPTER 1