WI-FI SYSTEM SPECIFICATIONS
Wi-Fi System Specifications
Wireless interface
Transmission Speed
Functions available
Web server
Communication mode
Security Settings
•
The wireless connection system is integrated in
the printer and uses the IEEE 802.11 b/g
protocol: data is transmitted using high
frequency radio waves.
•
The wireless system includes a network adapter
and radio wave system.
The USB connection and Wi-Fi connection can
be used at the same time.
•
54 Mbps on 2.4 GHz band, if available.
•
All functions can be used by the cable and
wireless connections (only reading of the
memory card is not available).
•
For simple printer management, use the web
browser for checking status, and defining and
modifying parameter settings.
•
Peer-to peer: The integrated wireless network
connection can connect directly with a PC
equipped with wireless functions for an ad hoc
mode connection.
•
The peer-to-peer connection method is used
for small/medium web connections, as the
increasing the number of network connections
reduces the quality and range of the
connection. This type of connection is set by
default.
•
Infrastructure: The printer is connected to a
network of PCs via an access point which is
connected to a central hub or gateway
connecting all the wireless peripherals, or with
an Ethernet connection.
•
To install and configure the printer in
Infrastructure mode a USB cable connection is
necessary. However this cable can be removed
once the network connection parameters have
been configured for wireless mode.
•
SSID (Service Set Identifier).
•
WEP (Wired Equivalent Privacy) key.
Via Web Server mode you can install WPA (WiFi
Protected Access) keys in PSK
(Pre Shared Key) mode Home/SOHO.
note: To enter the network protection keys,
you must access EWS before installing the
software via the USB connection.
TECHNICAL CHARACTERISTICS
51