Problems Turning On The Printer; Printing Problems - Olivetti SIMPLE_WAY User Manual

Problems Turning On the Printer

Problem
The printer does not turn on
when you press the Power
On/Off button on the front
panel.
Individual LEDs on the front
panel come on.

Printing Problems

Problem
Your printer does not print when
you click on the Print icon on the
task bar of the application you
are using.
The printing stops in the middle
of a print job.
Horizontal streaks are printed.
44 CHAPTER 5
Possible Cause
• The power cord is not
properly attached to the
printer and/or to a working
electrical outlet.
• Specific printer error as
signalled by the LED.
Possible Cause
• Your printer is not set as the
default printer.
• Your printer is not properly
connected to the computer.
• The paper is jammed.
• The ink cartridges are dirty.
Corrective Action
• Unplug the power cord from
the printer and from the
electrical outlet and then
plug it back.
• Make sure that the electrical
outlet is working by
attaching another appliance
that you know works into it,
then turn on the appliance.
• Check the corrective action
for the corresponding LED
that is explained in "Meaning
of LEDs on Front Panel".
Corrective Action
• In the Windows
environment:
1 Click Start > Settings >
Printers and Fax.
2 Right-click on your printer's
icon and select Set as
Default.
• In the Macintosh
environment:
1 Re-install the software
furnished with the printer
and check the print and
spooler settings of the Mac
OS X. Operating system.
1 Turn off your printer and
computer, then unplug the
USB cable from these two
devices.
2 Reattach the USB cable, then
turn on the printer first
followed by your computer.
1 Clear the paper jam.
See "Clearing Paper Jams".
2 Press the Cancel button to
reset the error condition. The
print job continues from the
next page.
• Clean the ink cartridges. See
"Cleaning the Ink Cartridge
Nozzles".