A
BOUT THE FAX MACHINE
C
ONSOLE
The specific keys of the models with TAD are described under the item " MODELS WITH A BUILT-IN TAD ONLY ".
•
After the
the speaker volume "up" or "down".
Display
A two-line liquid crystal display with a capacity of 16 characters
per line.
Shows operator prompts and error messages.
•
Scroll "forwards" and "backwards" through the values of a
parameter.
•
Move the cursor to the "right" and to the "left" while entering
numbers and names.
M
ODELS WITH A BUILT
•
Used to perform TAD functions. Described in the correspond-
ing chapter.
II
"Error" LED indicator
Signals an operating fault during transmission or
reception.
button has been pressed, it turns
-
IN TAD ONLY
With the handset lifted, gives access to the special func-
tions made available by the network manager and com-
monly known as REGISTER RECALL (R function).
Blinking, indicates that the memory contains docu-
ments that have not been printed.
Off, indicates that the memory is empty.
M
-
ODELS WITH A BUILT
IN TAD ONLY
On, indicates that there are messages or memos in the
memory that have already been played.
Blinking, indicates that the memory contains docu-
ments that have not been printed, messages or memos
that have not been played.
Off, indicates that the memory is empty.
•
Dial the fax or telephone number.
•
If pressed for more than a second, they automatically dial
(once set) the telephone or fax number assigned to them
(one-touch dialling function).
Enter numeric data.
•
Select digits and alphanumeric characters during the en-
•
try of numbers and names.
•
With tone dialling, they send a tone
down the line for special network serv-
ices.
They scroll "backwards" and "for-
•
wards" through characters and spe-
cial symbols during the entry of
names.