Nautilus T912 Assembly Instructions page 5

Step 5 - Attach Front Motor Cover
• Determine whether you will plug in the treadmill using the front or bottom power receptacle.
• If you are using the front power receptacle, plug the Power Cord into the front of the treadmill as shown.
If you are using the bottom power receptacle, plug the Power Cord into the the bottom power receptacle
located under the right side rail as shown.
• Use three Phillips Head Screws (#1) to secure the Front Motor Cover (#16).
������ ����������
Assembly of your Nautilus Commercial Series Treadmill is complete!
For more information visit our website Nautilus.com or call: 800-NAUTILUS (800-628-8458)
PN 41282C
16
1
Please refer to your Commercial Series Owners Manual
for information on proper use of your treadmill.
����� ����������