Step 3 - Attach Side Frame Covers
•
Use 10 Phillips Head Screws (#1) to attach the left and right Side Frame Covers (#12).
Step 4 - Attach Top Motor Cover ( T912 only )
•
Locate the white Data Center Cable (#16) coming from the treadmill Motor Control Board. Carefully plug the
Data Center Cable into the Top Motor Cover (#13).
•
Use two Phillips Head Screws (#1) to secure the Top Motor Cover onto the Kick Plate using care to avoid
pinching the Data Center Cable.
Step 4 - Attach Top Motor Cover ( T914 & T916 )
•
Use two Phillips Head Screws (#1) to secure the Top Motor Cover onto the Kick Plate.
12
1
1
13
16