Installing Towing Eye Bolt - Mercedes-Benz S 4300 Operator's Manual

Mercedes-benz automobile operator's manual
Table of Contents

Advertisement

!
When towing the vehicle with all wheels
on the ground, please note the follow-
ing:
With the automatic central locking acti-
vated and the SmartKey in starter
switch position 2, or KEYLESS-GO*
start/stop button in position 2, the ve-
hicle doors lock if the left front wheel
as well as the right rear wheel are turn-
ing at vehicle speeds of approximately
9 mph (15 km/h) or more.
Switch off the tow-away alarm
( page 85).
To prevent the vehicle doors from lock-
ing, deactivate the automatic central
locking ( page 106).
Towing of the vehicle should only be
done using the properly installed tow-
ing eye bolt. Never attach tow cable,
tow rope or tow rod to vehicle chassis,
frame or suspension parts.

Installing towing eye bolt

1 Cover on right side of front bumper
2 Cover on right side of rear bumper
Practical hints
Towing the vehicle
Removing cover
Press mark on cover in direction of ar-
row.
Lift cover off to reveal threaded hole for
towing eye bolt.
Installing towing eye bolt
Take towing eye bolt and wheel wrench
out of trunk ( page 344).
Screw towing eye bolt clockwise into
its stop and tighten with wheel wrench.
Removing towing eye bolt
Loosen towing eye bolt counterclock-
wise with wheel wrench.
Unscrew towing eye bolt.
Store towing eye bolt and wheel
wrench in trunk.
Installing cover
Fit cover and snap into place.
373

Advertisement

Table of Contents
loading

Table of Contents