Mercedes-Benz CLS500 Operator's Manual page 48

Cls-class
Hide thumbs Also See for CLS500:
Table of Contents

Advertisement

Starting with KEYLESS-GO*
Warning!
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see "Turning off with
KEYLESS-GO*" ( page 57).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
G
KEYLESS-GO start/stop button
1 USA only
2 Canada only
Make sure the gear selector lever is set
to P.
Depress the brake pedal during the
starting procedure. Do not depress
accelerator.
The selector lever lock is released.
Press KEYLESS-GO start/stop
button 1 once.
The engine starts automatically if the
SmartKey with KEYLESS-GO is in the
vehicle.
Getting started
Starting difficulties
If the engine does not start as described,
carry out the following steps:
If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
If you are starting the engine with
KEYLESS-GO: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.
Or:
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO.
Repeat the starting procedure
( page 46). Remember that extended
starting attempts can drain the battery.
Get a jump start ( page 406).
Driving
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls55 amg

Table of Contents