Table of Contents
Advertisement
Controls in detail
Useful features
i
If the indicator lamp 4 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the "rolling code" feature.
Step 7:
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the "Programming" portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
260
Step 8:
Locate "training" button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the "train-
ing" button may also be referred to as
"learn"or "smart" button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor's manual.
Step 9:
Press "training" button on the garage
door opener motor head unit.
The "training light" is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:
Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (1, 2
or 3).
Step 11:
Press, hold for two seconds and re-
lease same button a second time to
complete the training process.
Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
Step 12:
Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (1, 2
or 3).
Step 13:
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Advertisement
Table of Contents
