Table of Contents
Advertisement
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position U, the following lamps will
switch on when the vehicle is unlocked
with the SmartKey or KEYLESS-GO* during
darkness:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps
The locator lighting switches off when the
driver's door is opened.
If you do not open a door after unlocking
with the SmartKey the lamps will switch off
automatically after approximately
40 seconds.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until you see
lighting
in the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to switch
the locator lighting function
Turn the exterior lamp switch to
position U when exiting the vehicle.
The locator lighting feature is activat-
ed.
Setting ambient lighting
Use this function to adjust the brightness
of the ambient lighting.
Lighting
Function Surround
.
on
Controls in detail
Control system
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until you see
Ambient light Level
the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to select
the desired brightness of the ambient
lighting.
The setting 1 represents the darkest
level and setting 5 the brightest level.
The ambient light is switched off at set-
ting 0.
Lighting
in
161
Advertisement
Table of Contents
