Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Housing cover for low beam halogen or
Bi-Xenon* headlamp
2 Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb
Warning!
Do not remove the cover 1 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
390
3 Bulb socket for turn signal lamp bulb
4 Bulb holder of high beam bulb
5 Bulb socket for parking and standing
lamp bulb
6 Bulb holder of low beam bulb
Before you start to replace a bulb for a
front lamp, do the following first:
G
Turn the exterior lamp switch to
position M ( page 130).
Open the hood ( page 279) (except
for side marker lamps).
Low beam bulb (halogen headlamps
only)
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb holder 6 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 6.
Insert the new bulb so that its socket
locates in the recess of bulb holder 6
and is level to it.
Reinsert bulb holder 6 with the bulb in
the lamp and turn clockwise.
Align housing cover 1 and turn it
clockwise.
Advertisement
Table of Contents
