Operation Of Remote Control Unit; General Infromation Of Rc5400Sr To Sr5400 - Marantz SR5400 User Manual

OPERATION OF REMOTE CONTROL
UNIT
REMOTE CONTROL
The distance between the transmitter of the remote
control and the IR SENSOR of the SR5400 should
be less than 5 meters. If the remote control is pointed
in a direction other than the IR SENSOR or if there is
an obstacle between them, use of the remote control
may not be possible.
Remote-controllable range
SR5400
60°
Remote control unit (RC5400SR)
LOADING BATTERIES
The life of the batteries used with the remote control
is about 4 months with normal use. Also be sure to
replace batteries earlier when you notice that they
are getting weak.
1.
Remove the back cover.
2.
Insert the new batteries (AAA type) with
correct and polarity.
3.
Close the cover until it clicks.

GENERAL INFROMATION OF RC5400SR TO SR5400

To control the SR5400 by your RC5400SR, you have to select the device AMP or TUNER by pressing the
function selector button. Please refer below for the details in AMP and TUNER mode.
AMP MODE
POWER
Function selector * Selects a particular source component
POWER
SLEEP *
TV VCR1 DSS/VCR2 DVD
MUTE *
TUNER CD TAPE CDR/MD
VOL 34 *
AUX AMP
TV MAIN
MENU
VOL. SLEEP MUTE VOL.
Cursor
OSD MENU
OK
OK
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
SETUP/T.TONE Enters the test tone mode for setting the Speaker Level Setup
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
MENU OFF
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN
S-DIRECT *
0
CHANNEL/SKIP
NIGHT *
BASS TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT Surround mode (1-8) Selects the surround mode
+/A –/B /VCR ATT. PTY
/ANT
6.1CH-IN (9)
DISC/DECK
A/D (0)
SYSTEM REMOTE CONTROLLER
RC5400SR
BASS 34 *
TREBLE 34 *
ATT *
* These buttons are used to control SR5400 in any function mode.
TUNER MODE
TUNER
POWER
0-9
CLEAR
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD MEMO
P.SCAN
AUX AMP
TV MAIN
VOL. SLEEP MUTE VOL.
CHANNEL/SKIP • Selects a preset station
/
OSD MENU 4 ¢
TUNE/SEARCH Tunes a station
OK
5 / 6
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
MODE 1 2
NIGHT CSII EX/ES DSP
4 5 6
DISP./RDS ;
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN
0
F.DIRECT 2
CHANNEL/SKIP
PTY 9
BASS TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT
/VCR * : European model only
+/A /ANT –/B ATT. PTY
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
Turns the SR5400 on and off
Sets the sleep timer function
Decreases the sound temporarily
Adjusts the over all sound level
Enters the SETUP MENU
Moves the cursor for settings in the SETUP MENU
• Enters the SETUP MENU
• Confirms the settings in SETUP MENU
Exits from the SETUP MENU
Selects the Source Direct mode
Turns on or off the NIGHT mode
Selects the 6.1CH IN
Switches between the analog and digital inputs
Adjusts the tone control of low frequency sound
Adjusts the tone control of high frequency sound
Reduces the input level
Selects a frequency band
Inputs the numeric #s
Clears the inputting
Enters the tuner preset memory numbers
Starts preset scan
• Changes a PTY type *
Selects the auto stereo mode or mono mode
Selects the display mode in RDS *
Selects the "Frequency direct input"
Displays the programmed information of the current station *
9