Operation Of Remote Control Unit - Marantz SR-14mkII User Manual

Av surround receiver
Hide thumbs Also See for SR-14mkII:
Table of Contents

Advertisement

OPERATION OF REMOTE CONTROL UNIT

1. Remote control
The distance between the transmitter of the remote control unit and
the IR SENSOR of the SR-14mkII should be less than about 15 feet. If
the transmitter is pointed to a direction other than the IR SENSOR or if
there is an obstacle between them, remote control may not be
possible.
Remote-controllable range
Remote control unit (RC5000i)
2. Receiving the remote control codes
The RC5000i can learn most of the remote control codes from various
equipment, it learns the full word length of the code it is receiving.
Due to the sensitivity of the receiving LED the RC5000i may also
"learn" noise from fluorescent lights, etc. which can quickly fill up the
memory of the RC5000i.
In order to maximize the memory capacity of the RC5000i please pay
close attention to the following:
(1) Aim the transmitting remote control at a direct line of sight to
the RC5000i remote receiver eye.
(2) Keep 2 inches between transmitting remote and the RC5000i
receiving eye.
OK
Top View
LD remote
RC5000i
control unit
Side View
LD remote
RC5000i
control unit
5 cm
SR-14mkII
60
NO GOOD
Top View
RC5000i
LD remote
control unit
Side View
RC5000i
LD remote
control unit
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents