Mackie Spike User Manual page 50

DSP screen continued
Link
DSP Single Channel View (with no Active modules)
Link buttons
These link the channel 1 and channel 2 controls in the selected DSP module, so they are always
identical. This is useful when recording or mastering a stereo source, in which identical adjustments
are normally made to both left and right channels at once.
It doesn't matter which channel's controls you operate, when they are linked, they change together.
Note: When the LINK button is enabled, that channel's settings are copied over to the other
channel. Linking in the EQ section also links the fi lters.
User's
50
Guide