Mackie Spike User Manual page 47

Powered recording system
Hide thumbs Also See for Spike:
Table of Contents

Advertisement

DSP screen continued
In addition to the high-pass and low-pass fi ltering, each channel has its own 4-band EQ, Compressor/
Limiter, and Gate/Expander DSP module. Any adjustments you make to the settings of these three
modules will affect your recording.
Each module has a graphical display in which you can click and drag the nodes to change the param-
eters, or you can click and drag on the individual controls to fi ne tune the settings. Holding the Ctrl
(Control) key when you click on a control slider, or control node in the graphic display, returns the
associated parameters to their default values.
Zoom (Z) button
Use this to switch between a single-chan-
nel or two-channel view. The single channel
view has larger graphs and meters and also
shows the lovely HP/LP fi lter display.
Note: even though the HP/LP
graph is displayed here, it is not
part of the EQ module. All HP/LP
fi ltering is performed before the
signals reach the DSP modules.
Switch (S) button
Once the single-channel view is open, the
SWITCH button appears just above the
ZOOM button. Use this to switch between the channel 1 and channel 2 displays.
Switch
Zoom
DSP Single Channel View (showing Channel 1)
User's
47
Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spike xd-2

Table of Contents