Table of Contents
Advertisement
Before you can modify your system translation, you must retrieve the current system
translation from your PARTNER system. This involves the following steps:
• Backing up the system information
• Retrieving the system information to your PC
• Disconnecting from the PARTNER system (optional)
BACK UP THE SYSTEM INFORMATION
After connecting to the system, you must back up the system information before
making any changes.
On the Administration menu, select Retrieve System Information.
1
Click Remote Backup. If you want to also retrieve this system
2
information, click Retrieve System Translations. If you want to also
retrieve maintenance information for the PARTNER system, click
Retrieve Maintenance Data.
Click Next.
3
If you selected Retrieve System Translations and/or Retrieve
4
Maintenance Data, a dialog box will appear. Select the file or enter a
new name, and then click Save. You will repeat this step if you are
retrieving both the current translation and the maintenance
information. When the retrieve is complete, a dialog box will
appear. Click OK.
The system translation is copied to the Remote Access card on the
PARTNER system. (System translation is the technical term for the
programming information.)
A backup usually takes about fifteen seconds.
Retrieving a System Translation
R e t r i e v i n g a S y s t e m Tr a n s l a t i o n
4
19
Advertisement
Table of Contents
