Table of Contents
Advertisement
AUTOMATED ATTENDANT
3
You connect to the Remote Access card by going through an active automated attendant
(such as a voice mail system that automatically answers and routes the call). You can use
this method after business hours or anytime the Automated Attendant is active. To use the
Automated Attendant method, you must have previously established
a Hunt Group for the PARTNER Remote Access card.
To create a Hunt Group while at a PARTNER phone:
1 From extension 10 or 11, activate System Programming by pressing
2 Press the left
3 Enter
4 At the GROUP: prompt, enter a group number (1–6)
We recommend the number 6.
5 The following display appears
HUNT GROUP 6
EXTENSION:
6 Enter extension
(This is the pre-established extension number for your PARTNER modem.)
7 Exit programming mode by pressing
For more information about Hunt Groups, refer to the PARTNER system
I
documentation.
For information about the location of special programming buttons on a PARTNER
I
phone, see the PARTNER system documentation.
12
C o n n e c t i n g t o t h e PA R T N E R A C S S y s t e m
On the File menu, select Connect to PARTNER System.
1
Select Automated Attendant, and click Next.
2
Enter the dial string and then click OK.
3
• phone number
• seven commas
•
and the single-digit Hunt Group number for the
7
7
Remote Access Card
When prompted, enter the Remote Administration Password and
4
then click OK.
When the connection is completed, a dialog box appears. Click OK.
5
button twice
Intercom
#
5
0
5
7
6
Feature
0
0
Feature
0
0
Advertisement
Table of Contents
