Table of Contents
Advertisement
Creating a Remote Administration Password
3
For security purposes, the Remote Administration Password is different from the system
Password. The Remote Administration Password can only be created on the PARTNER
system and must exist before you can connect.
Using a PARTNER display phone:
1 From extension 10 or 11, activate System Programming by pressing
2 Press
3 Press
4 Enter a password up to 8 alphanumeric characters in length (there is no default pass-
word). Each character is established by entering two digits. (See the Character Code
Table (5-3) on page 5-131 of the Programming and Use manual for additional details.)
5 To save the password, press the
confirming that the password was saved. (Warning: If you exit without pressing
Enter
For information about the location of special programming buttons on a PARTNER
phone, see the PARTNER system documentation.
18
C o n n e c t i n g t o t h e PA R T N E R A C S S y s t e m
System Program
System Program
#
7
, your new password will not be saved.)
3
0
key. The display shows "Remote Password"
Enter
Feature
0
0
Advertisement
Table of Contents
